Introduction
The ADDERLink X-DVI PRO-MS is Adder's second generation extender to transmit two DVI video streams or two HDMI streams, USB 2.0 and audio over CATx cable. The ADDERLink X-DVI PRO-MS allows users to extend control of any computer with multiple screen outputs and USB 2.0 over distances up to 50 meters with resolutions up to 165 MPixels per second (e.g. 1920x1200 @ 60Hz or 3840x2400 @ 17Hz). In operation, the X-DVI PRO-MS is truly plug and play, capturing full EDID data from the screen ensuring your hardware is always setup to deliver optimal display performance.
Features
- Full Single Link DVI Extender
- The ADDERLink X-DVI PRO-MS extender is designed to deliver two
single link DVI digital video resolutions up to 165 MPixels per second.
165MPixels per second is the maximum data rate available on single link
DVI connections, and is achieved without the need to compress data in
any way. Resolutions supported by single link DVI range from 640x480 @
60 Hz (25 MPixels/s) through to 3840x2400 @ 17Hz (164 MPixels/s).
- HDMI 1.3a Operation
- By using HDMI to DVI converter cables, the ADDERLink X-DVI PRO-MS
can support HDMI Video and Audio up to the 165MHz clock rate (19201080
@60Hz 24bit color) 8 channels of HDMI audio is supported with sample
sizes of 16, 20 or 24 bit at 32KHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz,
176.4kHz, or 192kHz (simultaneously with the jack audio). It does not
support HDCP or CEC control.
- CD Quality Audio Extention
- Two audio extention ports (stereo channel 16 bit audio ports sampled
at 44.1KHz -CD quality) are available to transfer audio from local to
remote for a line out / headphone use case.
- USB 2.0 Transparent Connection
- Delivers bidirectional USB 2.0 (low speed/full speed) data allowing
you to extend any USB device up to 50 meters over the same CATx cables.
This makes the X-DVI PRO perfect for distributed workstations where you
want to reduce environmental concerns such as heat and noise. A typical
example of this would be post production suites. By centralising your
workstations, you can also extend operational life-span by ensuring
optimal temperature control, and minimal physical disturbance.
- CATx Distribution
- ADDERLink X-DVI PRO-MS requires one CATx (CAT7a recommended) cable
per video head. The X-DVI PRO-MS delivers video alongside USB data and
audio over a single CATx cable. Dependent upon cable type, quality and
connections distances may vary. See Technical specification for detailed
rules.
- The extended profile DDC EDID data from the display is captured to
ensure that your system is configured to deliver optimal video
performance.
- Intelligent Cable Modelling
- The X-DVI PRO-MS has been designed to be used in many different
environments across many different types and makes of cable. To ensure
the quality of your DVI signal is always optimal, Adder have modelled a
broad range of cables and integrated these models into the X-DVI PRO-MS.
As a result, the user has greater flexibility over the CATx connection,
allowing you to make use of existing CATx infrastructure.
Specifications
- Video Resolution
- Single link DVI video resolution up to a maximum pixel rate of
165MP/s HDMI operation 1920 x 1080 @60Hz 24 bit colour
- O/S Compatability
- Operating system independent
- Connectors (local / remote)
- Local end: 2 x DVI-D, 2 x USB B, power jack, 2 x 3.5 mm audio jack
socket and 2 x RJ45
- Remote end: 2 x DVI-D, 4 x USB A, power jack,2 x 3.5mm audio jack
socket and 2 x RJ45
- Physical design
- Local: All metal case, 120mm / 4.7'' (w) x 75mm / 3''(d) x 48mm /
2'' (h) 500g / 1.1 lb.
- Remote: All metal case, 120mm / 4.7'' (w) x 75mm / 3''(d) x 48mm /
2'' (h) 500g / 1.1 lb.
- Power
- 100 - 240VAC, 50/60Hz input - 5V, -12W output for both local and
remote
- Operating Temperature
- 0ºC to 40º / 32ºF to 104ºF
- Approvals
- Cable Recomendation
- Daetwyler Uninet 7702 Flex 4P