Introduction

Rack PDU 2G, Metered by Outlet with Switching, ZeroU, 11.0kW, 230V, (21) C13 & (3) C19
APC Metered by Outlet with Switching Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

What's Included

• CAN Port Terminator
• Installation guide
• Rack Mounting brackets
• Safety guide
• Serial configuration cable

Specifications

Output

• Nominal Output Voltage : 230V
• Maximum Total Current Draw per Phase : 16A
• Output Connections
  • (21) IEC 320 C13 IEC 320 C13
  • (3) IEC 320 C19 IEC 320 C19

Input

• Nominal Input Voltage : 400V 3PH
• Input Frequency : 50/60 Hz
• Regulatory Derated Input Current (North America) : 16A
• Input Connections
  • IEC 309 16A 3P+N+PE
  • IEC 309 20A 3P+N+E
• Cord Length : 1.83 meters
• Maximum Line Current per phase : 16A
• Maximum Input Current per phase : 16A

Physical

• Net Weight : 8.23 KG
• Maximum Height : 1829.00 mm
• Maximum Width : 56.00 mm
• Maximum Depth : 51.00 mm
• Color : Black