Introduction

Battery failure notification provides early-warning fault analysis on batteries enabling timely preventive maintenance. ECO Mode by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection. It protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Specifications

General
Device Type	UPS - Power Factor Correction (PFC) - rack-mountable
Height (Rack Units)	2U
Colour	Black
Bundled with	APC UPS Network Management Card AP9631
Power Device
UPS Technology	On-line
Input Voltage	AC 230 V
Input Voltage Range	AC 50 - 150 / 80 - 150 V
Frequency Provided	50/60 Hz ± 3Hz
Frequency Required	40 - 70 Hz
Input Connectors	1 x power IEC 60320 C14,power BS 1363A,Europlug (power CEE 7/16)
Power Output Connectors Details	6 x power IEC 60320 C13
Output Voltage	AC 220/230/240 V ± 2% - 50/60 Hz
Power Capacity	1000 Watt / 1000 VA
Output Waveform	Sinewave
Surge Suppression	Yes
Surge Energy Rating	432 Joules
Circuit Protection	Circuit breaker
Battery
Technology	Lead Acid
Run Time (Up To)	8.5 min at full load 21.1 min at half load 9.8 min at 900 Watts 13.8 min at 700 Watts 59.6 min at 200 Watts
Recharge Time	3 hours
Features	Maintenance free,sealed,leak-proof
Networking
Remote Management Interface	Ethernet 10/100,RS-232,USB
Expansion / Connectivity
Interfaces	1 x management (RS-232) - RJ-45 1 x EPO (emergency power off) 1 x management (USB) 1 x management (Fast Ethernet) - RJ-45
Expansion Slots	1 (total) / 0 (free) x SmartSlot
Software / System Requirements
Software Included	Drivers & Utilities
Environmental Standards
ENERGY STAR	Yes
Environmental Parameters
Min Operating Temperature	0 °C
Max Operating Temperature	40 °C
Humidity Range Operating	0 - 95% (non-condensing)
Sound Emission	50 dBA
Dimensions &Weight
Width	43.2 cm
Depth	50.5 cm
Height	8.5 cm
Weight	21 kg